RAM 1500 Truck 4WD V8-5.9L VIN Z (2002)
4.
Place the axle flange reinforcement bracket body into position and install the two new brake caliper adapter-to-caliper mounting bracket bolts
provided in the package (Figure 3). Only tighten the bolts to 75 in. lbs. (9 N.m) at this time.
NOTE:
All of the bolts provided in the repair package are interchangeable.
5.
Place the axle flange reinforcement bracket cap into position (Figure 4). Install the two retaining bolts provided and tighten the bolts evenly to 60
ft. lbs. (81 N.m) (Figure 4). Then tighten the bolts to 120 ft. lbs. (162 N.m). Tighten the bolts a second time to 120 ft. lbs. (162 N.m).
CAUTION:
The axle flange reinforcement cap retaining bolts must be tightened evenly to maintain equal clamping (gaps) between the axle flange
reinforcement body and reinforcement cap.
