RAM 1500 Truck 4WD V8-5.9L VIN Z (2002)
19. Remove rear pinion bearing with Puller/Press C-293-PA and Adapters C-293-42 (Fig. 45).
20. Remove depth shims from the pinion shaft and record thickness of shims.
INSTALLATION
NOTE: The ring gear and pinion are serviced in a matched set. Never replace one gear without replacing the other matching gear. If ring and pinion
gears or bearings are replaced, refer to Adjustments for Pinion Gear Depth Setting.
1. Apply Mopar Door Ease or equivalent lubricant to outside surface of the bearing cups.
2. Install rear pinion bearing cup with Installer 8692 and Driver Handle C-4171 (Fig. 46) and verify cup is seated.
