RAM 1500 Truck 4WD V8-5.9L VIN Z (2002)
11. With the manual lever in the SECOND position (the SECOND position is with the manual lever moved one detent rearward of the full forward
position), measure the resistance between the Fused Ignition Switch Output and the Back-up Lamp feed pins of the TRS. The resistance should be
31.9 ohms. If the resistance is not correct, replace the TRS.
12. With the manual lever in the LOW position (the LOW position is with the manual lever moved to the full forward position), measure the resistance
between the Fused Ignition Switch Output and the Back-up Lamp feed pins of the TRS. The resistance should be 13.7 ohms. If the resistance is not
correct, replace the TRS.
