RAM 1500 Truck 4WD V8-5.9L VIN Z (2002)
4. Remove the a-pillar trim panels (2), Refer to Trim Panel.
5. Remove the headliner (9) and from the inside of the vehicle, cut the upper urethane bonding from around windshield upper edge using a suitable
sharp cold knife (C-4849). A pneumatic cutting device can be used but is not recommended.
6. From the outside of the vehicle, cut urethane bonding from the remaining sides of the windshield using a suitable sharp cold knife (C-4849). A
pneumatic cutting device can be used but is not recommended.
7. Separate windshield from vehicle.
INSTALLATION