RAM 1500 Truck 4WD V8-5.9L VIN Z (2002)
17. Tighten the lower mounting bolt to 75 in. lbs. (8.5 N.m).
18. Connect the wiper motor electrical connector (Figure 3).
19. Install the wiper motor linkage arm to the wiper motor shaft as shown in Figure 5.
NOTE:
The arms for the wiper pivots must be pointing downward (forward).
20. Install the wiper motor linkage arm nut and tighten the nut to 204 in.lbs. (23 N.m).
21. Install the plastic cowl plenum cover panel.
22. Install the plenum cover sound deadening pad.
23. Connect the negative battery cable(s) to the negative battery post(s).
24. Close the hood.
25. Install the right and left wiper arms onto the wiper pivots and verify that the wiper arm retaining clips are engaged.
26. Cycle the windshield wipers to verify proper operation and the wiper blade park position.
