RAM 1500 Van V6-3.9L VIN X (1997)
Blower Motor: Service and Repair
Rear Blower Motor Replacement
With A/C
Fig 37 Rear Heat-A/C System
Removal
1. Disconnect and isolate the battery negative cable.
2. Unplug the wire harness connector from the rear blower motor assembly.
3. Remove the screws that secure the rear blower motor assembly to the floor behind the driver seat.
4. Remove the blower motor assembly.
Installation
1. Position the blower motor assembly and install the floor mounting screws.
2. Plug in the rear blower motor wire harness connector.
3. Connect the battery negative cable.
Without A/C
Removal
1. Remove the rear heater assembly.
2. Remove the screws that secure the blower motor to the rear heater assembly.
3. Remove the blower motor from the rear heater.
Installation
1. Position the blower motor in the rear heater assembly and install the mounting screws.
2. Install the rear heater assembly.