RAM 1500 Van V6-3.9L VIN X (1997)
1. Press new ball stud in lower suspension arm with Remover/Installer C-4212F, or equivalent.
2. Position new seal over ball stud and use a socket to force lip of seal until securely in place.
3. Position lower ball stud in steering knuckle.
4. Install retaining nut on the lower ball stud and tighten to:
-
11/16-16 bolt: 183 Nm (135 ft. lbs.)
-
3/4-16 bolt: 237 Nm (175 ft. lbs.)
5. Install new cotter pins.
6. Install the strut bar.
7. Remove spring compressor tool. Install shock absorber.
8. Install rotor and disc brake caliper.
9. Install wheel and tire assemble and lower the vehicle.
