RAM 1500 Van V6-3.9L VIN X (1997)
2. Install the pinion rear bearing cup with:
-
Installer C-4308 and Driver Handle C-4171, or equivalent for the 8 1/4 axle.
-
Installer C-4310 and Driver Handle C-4171, or equivalent for the 9 1/4 axle.
3. Ensure cup is correctly seated.
4. Apply MOPAR Door Ease, or equivalent, stick lubricant to outside surface of bearing cup.
5. Install the pinion front bearing cup with:
-
Installer D-130 and Handle C-4171, or equivalent for the 8 1/4 axle.
-
Installer D-129 and Handle C-4171, or equivalent for the 9 1/4 axle.
6. Install pinion front bearing, and oil slinger, if equipped.
7. Apply a light coating of gear lubricant on the lip of pinion seal. Install seal with:
-
Installer C-4076-B and Handle C-4735-1, or equivalent for the 8 1/4 axle.
-
Installer C-3860-A and Handle C-4171, or equivalent for the 9 1/4 axle.
