RAM 1500 Van V8-5.2L CNG VIN T (1999)
8.
The MDS2 and DRB III will prompt for any operator action needed during the remainder of the reprogramming process.
NOTE:
Due to the PCM flash procedure, diagnostic trouble codes (DTC's) may be set in other modules (ETAX, BCM, MIC, SKIM, ABS) within the vehicle
(if so equipped). Some DTC's may cause the Malfunction Indicator Light (MIL) to illuminate. All of the DTC's relate to a loss of communications
with the module that is being flashed. Check all modules, record the trouble codes, and erase the trouble codes prior to returning the vehicle to the
customer. Erase any trouble codes in the PCM only after all other modules have had their trouble codes erased.
B.
Install Authorized Software Update Label:
Type or print (with a ballpoint pen) the part number, dealer code and date on the Authorized Software Update Label and attach it to the
PCM. Cover the label with the clear plastic portion of the label.
C.
Install the Authorized Modifications Label:
Type or print (with a ballpoint pen) the recall number, dealer code and date on the Authorized Modifications Label Then attach the label
near the VECI label.
