RAM 1500 Van V8-5.2L VIN Y (1999)
3. Roll up the glove box into the instrument panel. Refer to Glove Box - Roll Down in the Replacement for the procedures.
4. Reconnect the battery negative cable.
Inner Door and Bin
1. Position the inner door and bin unit onto the glove box outer door.
2. Install and tighten the eight screws that secure the inner door and bin unit to the glove box outer door. Tighten the screws to 1.9 Nm (17 in.
lbs.).
3. Install and tighten the two screws that secure the bottom of the glove box outer door to the bottom of the glove box bin. Tighten the screws to
1.9 Nm (17 in. lbs.).
4. Install the glove box into the instrument panel. Refer to Glove Box - Installation in the Replacement for the procedures.
5. Install the handle and latch onto the glove box. Refer to Glove Box Components - Handle and Latch in the Replacement for the procedures.
6. Reconnect the battery negative cable.