RAM 1500 Van V8-5.2L VIN Y (1999)
6. Install and tighten the two screws that secure the gear selector indicator mechanism to the rear of the instrument cluster housing. Tighten the
screws to 2.2 Nm (20 in. lbs.).
7. Install the instrument cluster into the instrument panel. Refer to Instrument Cluster in the Replacement for the procedures.
8. Check the gear selector indicator for proper calibration.
9. Install the knee blocker onto the instrument panel. Refer to Knee Blocker in the Replacement for the procedures.
10. Reconnect the battery negative cable.