RAM 1500 Van V8-5.2L VIN Y (1999)
Starter Solenoid: Testing and Inspection
STARTER SOLENOID
This test can only be performed with the starter motor removed from the vehicle.
1. Remove the starter motor from the vehicle. Refer to Starter Motor Replacement for the procedures.
2. Disconnect the wire from the solenoid field coil terminal.
Continuity Test Between Solenoid Terminal And Field Coil Terminal - Typical
3. Check for continuity between the solenoid terminal and the solenoid field coil terminal with a continuity tester. There should be continuity. If OK,
go to Step 4. If not OK, replace the faulty starter motor assembly.
Continuity Test Between Solenoid Terminal And Solenoid Case - Typical
4. Check for continuity between the solenoid terminal and the solenoid case. There should be continuity. If not OK, replace the faulty starter motor
assembly.