RAM 1500 Van V8-5.2L VIN Y (1999)
Power Steering Pump: Service and Repair
Power Steering Pump Removal and Installation
REMOVAL
WARNING: DO NOT ATTEMPT TO REMOVE THE PUMP WITHOUT REMOVING THE BELT FIRST. THE AUTOMATIC
TENSIONER IS UNDER A HIGH SPRING LOAD.
Serpentine Belt
1. Remove drive belt by rotating tensioner clockwise and sliding belt off tensioner pulley.
2. Disconnect hoses from the power steering pump and cap fittings.
3. Remove bracket bolts and remove pump assembly.
4. Remove the power steering pump pulley.