RAM 1500 Van V8-5.2L VIN Y (1999)
Fig. 59
26. Remove left-side screw and remove 3-4 accumulator housing from valve body (Fig. 59).
Fig. 60
27. Bend back tabs on boost valve tube brace (Fig. 60).
Fig. 61
28. Remove boost valve connecting tube (Fig. 61). Disengage tube from upper housing port first. Then rock opposite end of tube back and forth to
work it out of lower housing.
CAUTION: Do not use tools to loosen or pry the connecting tube out of the valve body housings. Loosen and remove the tube by hand only.