RAM 1500 Van V8-5.9L VIN Z (1998)
Cruise Control Vacuum Reservoir: Service and Repair
Vacuum Reservoir Location
The vacuum reservoir is attached to the right-inner fender located below the right headlamp.
REMOVAL
1. Remove right headlamp assembly. Refer to Lighting and Horn/Headlamp Bulb Replacement.
2. Disconnect vacuum line at reservoir.
3. The reservoir is attached with one bolt (upper). The lower ear at bottom of reservoir fits into an access slot on fender support. Remove mounting
bolt and remove reservoir from vehicle.
INSTALLATION
1. Fit lower reservoir mounting ear into access slot on fender support.
2. Install upper bolt and tighten to 4 N.m (35 in. lbs.) torque.
3. Install vacuum line at reservoir.
4. Install right headlamp assembly Refer to Lighting and Horn/Headlamp Bulb Replacement.
