RAM 1500 Van V8-5.9L VIN Z (1998)
Engine Block Heater: Description and Operation
BLOCK HEATER
An optional engine block heater is available for all models. The heater is equipped with a power cord that is located behind the grille. The cord is
attached to an engine compartment component with tie-straps. The heater warms the engine providing easier engine starting and faster warm-up in low
temperatures. The heater is mounted in a core hole of the engine cylinder block (in place of freeze plug) with the heating element immersed in engine
coolant. The power cord is located behind the radiator grille. Connect the power cord to a grounded, 110-120 volt AC electrical outlet with a
grounded, three wire extension cord.
WARNING: DO NOT OPERATE ENGINE UNLESS BLOCK HEATER CORD HAS BEEN DISCONNECTED FROM POWER SOURCE
AND SECURED IN PLACE. THE POWER CORD MUST BE SECURED IN ITS RETAINING CLIPS AND ROUTED AWAY FROM
EXHAUST MANIFOLDS AND MOVING PARTS.
