RAM 1500 Van V8-5.9L VIN Z (1998)
Vacuum Reservoir HVAC: Service and Repair
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the right front fender extension from the fender.
Vacuum Reservoir Remove/Install
3. Unplug the vacuum harness connector from the vacuum reservoir.
4. Remove the two screws that secure the vacuum reservoir to the right cowl side panel.
5. Remove the vacuum reservoir from the right cowl side panel.
6. Reverse the removal procedures to install. Tighten the mounting screws to 3.9 N.m (35 in. lbs.).
