RAM 1500 Van V8-5.9L VIN Z (1998)
5. Install the retaining nut on the lower ball joint and tighten to:
-
LD 11/16-16 bolt: 183 Nm (135 ft. lbs.).
-
HD 3/4-16 bolt: 237 Nm (175 ft. lbs.).
6. Install new cotter pins.
7. Install the strut bar.
8. Remove the spring compressor tool.
9. Install the stabilizer bar.
10. Install the shock absorber.
11. Install disc brake caliper.
12. Install wheel and tire assembly and lower the vehicle.