RAM 2500 Truck 2WD L6-5.9L DSL Turbo (2008)
Antenna, Navigation: Service and Repair
Removal
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the instrument panel top cover See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Instrument Panel Cover - Removal .
3. Remove the radio See: Radio, Stereo, and Compact Disc/Radio/Stereo/Service and Repair/Removal and Replacement/Removal .
4. Remove the antenna mounting fasteners.
5. Cut each end of the cable (1) and leave remaining portion in the instrument panel.