RAM 2500 Truck 2WD L6-5.9L DSL Turbo (2008)
Power Seat Switch: Testing and Inspection
POWER SEAT SWITCH
For complete circuit diagrams, refer to the appropriate wiring information. The wiring information includes wiring diagrams, proper wire and
connector repair procedures, details of wire harness routing and retention, connector pin-out information and location views for the various wire harness
connectors, splices and grounds.
1. Disconnect and isolate the battery negative cable.
2. Remove the power seat switch from the power seat.
3. Using an ohmmeter to test the continuity of the power seat switches in each position. Refer to the POWER SEAT SWITCH TEST TABLE. If OK,
See: Seats/Seat Track/Testing and Inspection . If not OK, replace the inoperative power seat switch.