RAM 2500 Truck 2WD L6-5.9L DSL Turbo (2008)
Camshaft: Procedures
INSPECTION
Camshaft
1. Inspect the valve lobes (1) and bearing journals (2) for cracks, pitting, scoring, or generally excessive wear. Replace any camshaft that exceeds the
allowable limits.
2. Measure the bearing journals and lobes.
CAUTION: If Camshaft lobes are worn, requiring camshaft replacement, it is necessary to replace the tappets also. See: Lifter / Lash
Adjuster/Service and Repair/Removal and Replacement/Valve Tappet(s) - Removal.
Camshaft Bushing/Bores
