RAM 2500 Truck 2WD L6-5.9L DSL Turbo (2008)
Steering Wheel: Service and Repair
Removal
REMOVAL
1. Disable and remove the driver's side airbag. See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Removal and
Replacement/Driver Airbag - Removal .
2. Partially remove the steering wheel bolt and leave the bolt in the column.
3. Install puller CJ98-1 (2) or equivalent using the top of the bolt to push on.
4. Remove and discard the steering wheel bolt.
5. Remove the steering wheel (1).