RAM 2500 Truck 2WD L6-5.9L DSL Turbo VIN 7 (2001)
Rear Door Panel: Service and Repair
Waterdam
WATERDAM
REMOVAL
1. Remove the inside handle actuator. Refer to Rear Door Interior Handle.
2. Remove the speaker.
3. Separate the waterdam from the inner door panel and off of the latch linkages.
INSTALLATION
1. Position the wire harness and actuator rods through the holes in the waterdam.
2. Secure the waterdam to the inner door panel.
3. Install the speaker.
4. Install the inside handle actuator.