RAM 2500 Truck 2WD L6-5.9L DSL Turbo VIN 7 (2001)
Fig. 26 Power Window/Lock Switch Panel
8. Disengage power window/lock switch connectors from switch panel, if equipped.
9. Separate trim panel from door.
INSTALLATION
1. Engage power mirror switch connector, if equipped.
2. Engage power window/lock switch connectors to switch panel, if equipped.
3. Position trim panel on door.
4. Engage clips around perimeter of trim panel, attaching trim panel to door.
5. Install screws attaching pull cup to door.
6. Install screw attaching trim panel to outside mirror frame.
7. Install window crank, if equipped.