RAM 2500 Truck 2WD L6-5.9L DSL Turbo VIN 7 (2001)
Fig. 23
3. Fold the load floor up, remove the front bolts and remove the tray. (Fig. 23)
INSTALLATION
1. Install the load floor and install the bolts.
2. Tighten the bolts to 40 N.m (30 ft.lbs).
3. Fold the load floor down and install the nuts.
4. Tighten the nuts to 25 N.m (18 ft.lbs).
Load Floor Support Cylinder
LOAD FLOOR SUPPORT CYLINDER
REMOVAL
1. Open the load floor.