RAM 2500 Truck 2WD L6-5.9L DSL Turbo VIN 7 (2001)
Power Seat Switch: Testing and Inspection
Passenger Power Seat Switch Test
1. Disconnect and isolate the battery negative cable.
2. Remove the power seat switch from the power seat.
Fig.7 Testing Passenger Power Seat Switch
3. Use an ohmmeter to test the continuity of the power seat switches in each position. See the Power Seat Switch Continuity chart below. If OK, see
Power Seat Adjuster and Motors or Power Lumbar Adjuster and Motor in the Diagnosis and Testing. If not OK, replace the faulty power seat
switch unit.