RAM 2500 Truck 2WD L6-5.9L DSL Turbo VIN 7 (2001)
Clearance Lamp: Service and Repair
Clearance Lamp Replacement
REMOVAL
1. Disconnect and isolate the battery negative cable.
Fig.5 Roof Clearance Lamps
2. Remove screws holding clearance lamp lens to roof panel.
3. Rotate socket 1/4 turn counterclockwise and separate socket from lamp.
INSTALLATION
1. Install socket in lamp and rotate socket 1/4 turn clockwise.
2. Position clearance lamp on roof.
3. Install screws holding clearance lamp lens to roof panel. Tighten to 1 Nm (13 in. lbs.).
4. Connect the battery negative cable.