RAM 2500 Truck 2WD L6-5.9L DSL Turbo VIN 7 (2001)
Drive Belt: Service and Repair
Accessory Drive Belt - Removal
CAUTION: Do not attempt to check belt tension with a belt tension gauge on vehicles equipped with an automatic belt tensioner.
NOTE: The belt routing schematics are published from the latest information available at the time of publication. If anything differs between these
schematics and the Belt Routing Label, use the schematics on Belt Routing Label.This label is located in the engine compartment.
Non-A/C
1. - WATER PUMP
2. - ACCESSORY DRIVE BELT
3. - AUTOMATIC BELT TENSIONER
4. - 3/8" SQUARE BOLT
5. - MOUNT. BOLT
