RAM 2500 Truck 2WD L6-5.9L DSL Turbo VIN 7 (2001)
15.8 Nm (140 in. lbs.).
9. Final tighten the four nuts with washers that secure the battery tray support to the stud plates on the front wheelhouse inner panel. Tighten the nuts
to 15.8 Nm (140 in. lbs.).
10. If the left battery tray is being installed, install the battery temperature sensor onto the left battery tray. Refer to Battery Temperature Sensor for the
location of the proper battery temperature sensor installation procedures.
11. Install the battery onto the battery tray. Refer to Battery for the location of the proper battery installation procedures.