RAM 2500 Truck 2WD L6-5.9L DSL Turbo VIN 7 (2001)
![background image](/dodge/ram_2500_2wd/l6-5.9l_dsl_turbo_vin_7/Page-1153003.png)
2. Remove bushing with Tool Handle C-4171 and Bushing Remover SP-3550 (Fig. 103).
REACTION SHAFT SUPPORT BUSHING REMOVAL
1. Assemble Cup Tool SP-3633, Nut SP-1191 and Bushing Remover SP-5301 (Fig. 104).
2. Hold cup tool firmly against reaction shaft. Thread remover tool into bushing as far as possible by hand.
3. Using wrench, thread remover tool an additional 3-4 turns into bushing to firmly engage tool.
4. Tighten tool hex nut against cup tool to pull bushing from shaft. Clean all chips from shaft and support after bushing removal.