RAM 2500 Truck 2WD L6-5.9L DSL Turbo VIN C (2002)
8. Remove the steering pump to vacuum pump bracket attaching nuts.
9. Slide the steering pump from the bracket. Use care not to damage the internal oil seal in the vacuum pump.
10. Remove the two pump body spacers.
INSTALLATION - DIESEL ENGINE
1. Install the two pump body spacers.
2. Rotate the drive gear until the steering pump and vacuum pump drive dogs align. Install the steering pump onto the vacuum pump bracket. Use
care to avoid damaging the oil seal in the vacuum pump during installation. The steering pump housing and spacers must mate completely with the
vacuum pump bracket.