RAM 2500 Truck 2WD L6-6.7L DSL Turbo (2010)
5. On four door models, remove the child seat tether straps from the rear cab back panel (2) See: Restraint Systems/Seat Belt Systems/Child
Restraint/Child Seat Tether Attachment/Service and Repair/Child Seat Anchor - Removal.
6. On four doormodels, remove the center seat belt trim bezel See: Restraint Systems/Seat Belt Systems/Seat Belt Retractor/Service and Repair/Seat
Belt Retractor - Removal.
7. On four doormodels, remove the lower C-pillar trim panels See: Pillar Trim/C-Pillar Trim Panel - Removal.
8. On four door models, remove the push-pin fasteners (1 and 3) that secure the rear cab trim panel (2) to the rear cab back panel and remove the trim
panel.
Cab Back Trim Panel - Installation
INSTALLATION
1. On four door models, position the rear cab trim panel (2) onto the rear cab back panel and install the push-pin fasteners (1 and 3).
2. On four door models, install the lower C-pillar trim panels See: Pillar Trim/C-Pillar Trim Panel - Installation.
3. On four door models, install the center seat belt trim bezel See: Restraint Systems/Seat Belt Systems/Seat Belt Retractor/Service and Repair/Seat
Belt Retractor - Installation
4. On four door models, install the child seat tether straps See: Restraint Systems/Seat Belt Systems/Child Restraint/Child Seat Tether
Attachment/Service and Repair/Child Seat Anchor - Installation.