RAM 2500 Truck 2WD L6-6.7L DSL Turbo (2010)
![background image](/dodge/ram_2500_2wd/l6-6.7l_dsl_turbo/Page-2463002.png)
6. Using trim stick C-4755 or equivalent, release the six tabs (3) and separate the switch bezel (1) from the outboard side shield.
7. Pull the bezel (1) rearward and release the front retaining tab (2).
8. Disconnect the electrical connector (1).
9. Remove the screws (2) and remove the memory switch (4) from the switch bezel (3), if equipped.
10. Disconnect the lumbar switch electrical connector (1), if equipped and remove the switch bezel.