RAM 2500 Truck 2WD L6-6.7L DSL Turbo (2010)
13. Remove the 10 hog rings (2) and separate the cover (1) from the foam.
Power Without Vented Seat
NOTE: While servicing seat assemblies, See: Description and Operation
1. Using trim stick C-4755 or equivalent, release the six tabs (3) and separate the switch bezel (1) from the side shield.
2. Pull the bezel (1) rearward and release the front retaining tab (2).
3. Disconnect the electrical connector (1).
4. Remove the screws (2) and remove the memory switch (4) from the switch bezel (3), if equipped.
