RAM 2500 Truck 2WD L6-6.7L DSL Turbo (2010)
![background image](/dodge/ram_2500_2wd/l6-6.7l_dsl_turbo/Page-2468002.png)
3. Install the push pin fastener (3) and seat fully.
4. Install the recliner rod (1) and seat the retaining clip (2) fully.
5. Install the outer side shield and seat the clips (2) fully.
6. Install the screw (1).
NOTE: Power seat bezel shown, manual seat bezel similar.
7. Position the bezel (1) back into place and secure the front hook (2).
8. Seat the remaining clips (2) fully.