RAM 2500 Truck 2WD L6-6.7L DSL Turbo (2010)
![background image](/dodge/ram_2500_2wd/l6-6.7l_dsl_turbo/Page-2468009.png)
6. Connect the lumbar switch electrical connector (1), if equipped.
7. Position the switch bezel onto the outer side shield and connect the electrical connector (1).
8. Position the memory switch into the switch bezel and install the screws, if equipped.
9. Install the outer side shield and seat the clips (2) fully.
10. Install the screw (1).