RAM 2500 Truck 2WD L6-6.7L DSL Turbo (2010)
4. Install the caliper adapter mounting bolts (5). For 1500, tighten to 176 Nm (130 ft.lbs). For 3500, tighten to 339 Nm (250 ft.lbs).
5. Install the inboard (4) and outboard (2) pads. See: Disc Brake System/Brake Pad/Service and Repair/Removal and Replacement/Brake Pads -
Installation.
6. Install the caliper (2) and the caliper slide pin bolts (4) See: Disc Brake Caliper - Installation.
7. Install the tire and wheel assembly. See: Maintenance/Wheels and Tires/Wheels/Service and Repair.
Rear
REAR
NOTE: Caliper Adapter Wrench 10186 must be used to torque the upper caliper adapter bolts for the 2500 and 3500 series trucks.