RAM 2500 Truck 2WD L6-6.7L DSL Turbo (2010)
11. Disengage the A/C liquid line (2) from the two retaining clips (1) and remove the liquid line.
12. If required, replace the two liquid line retaining clips.
A/C Liquid Line - Installation
INSTALLATION
CAUTION: Be certain to adjust the refrigerant oil level when servicing the A/C refrigerant system See: Service and Repair/Refrigerant Oil
Capacity . Failure to properly adjust the refrigerant oil level will prevent the A/C system from operating as designed and can cause
serious A/C compressor damage.
NOTE: When replacing multiple A/C system components, see the Refrigerant Oil Capacities chart to determine how much oil should be added
to the refrigerant system See: Service and Repair/Refrigerant Oil Capacity .
NOTE: Replacement of the refrigerant line O-ring seals and gaskets is required anytime a refrigerant line is disconnected. Failure to replace
the rubber O-ring seals and metal gaskets could result in a refrigerant system leak.
1. Position the A/C liquid line (2) into the engine compartment and engage the liquid line to the two retaining clips (1). Make sure the retaining clips
are fully engaged.