RAM 2500 Truck 2WD L6-6.7L DSL Turbo (2010)
21. Install engine cover and tighten bolts (1) to 10 Nm (89 in. lbs.).
22. Connect negative battery cable(s).
23. Fill coolant system See: Engine, Cooling and Exhaust/Cooling System/Service and Repair.
24. Start engine and check for coolant or exhaust leaks.
Exhaust Gas Recirculation (EGR) Cooler Bypass Valve - Removal
REMOVAL
EGR CROSSOVER TUBE COVER
1. Disconnect both negative battery cables.
2. Remove bolts (1) and the EGR crossover tube cover (2).
EGR CROSSOVER TUBE