RAM 2500 Truck 2WD L6-6.7L DSL Turbo (2010)
Parking Assist Control Module: Service and Repair
Park Assist Module - Installation
INSTALLATION
1. Position the park assist module (1) at the mounting bracket (2) bonded to the back of the headliner (3).
2. Secure the module to the bracket with two fasteners (4).
3. Reconnect the two body wire harness connectors (5) to the module connector receptacles.
4. Reinstall the vehicle headliner See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Headliner - Installation.
5. Reconnect the battery negative cable.
