RAM 2500 Truck 2WD L6-6.7L DSL Turbo (2010)
Power Steering Fluid Cooler: Service and Repair
Power Steering Cooler - Removal
REMOVAL
1. Drain and siphon the power steering fluid.
2. Raise and support the vehicle See: Maintenance.
3. If equipped, remove the eight lower engine splash shield push pins (1) and remove the splash shield (2).
4. Disconnect the return and supply hoses connected to the power steering fluid cooler lines (3).
5. Remove the mounting bracket bolts (2) securing the fluid cooler (1) to the brace.
6. Remove the fluid cooler (1) from the vehicle.