RAM 2500 Truck 2WD V10-8.0L VIN W (2003)
Road Temperature Sensor: Service and Repair
AMBIENT TEMPERATURE SENSOR
REMOVAL
1. Open the hood.
2. Disconnect and isolate the battery negative cable.
3. Working on the underside of the hood, remove screw holding sensor to hood panel.
4. Disconnect the sensor electrical connector and remove sensor from vehicle.
INSTALLATION
1. Connect the sensor electrical connector.
2. Working on the underside of the hood, install screw holding sensor to hood panel.
3. Connect the battery negative cable.
4. Close the hood.
