RAM 2500 Truck 2WD V8-5.2L VIN Y (2000)
Radiator Support: Service and Repair
UPPER RADIATOR CROSSMEMBER
REMOVAL
1. Remove the hood latch.
Fig. 14
2. Remove the radiator and condenser bolts. (Fig. 14)
Fig. 15
3. Remove the bolts and remove the crossmember. (Fig. 15)
INSTALLATION
1. Install the crossmember and install the bolts.
2. Tighten the bolts to 28 N.m (21 ft.lbs).
3. Install the radiator and condenser bolts and tighten to 8 N.m (75 in.lbs).
4. Install the hood latch.