RAM 2500 Truck 2WD V8-5.7L (2008)
Body / Frame Mount Bushing: Service and Repair
Installation
INSTALLATION
CAUTION: Whenever a body isolator bolt requires servicing or tightening, it is necessary to remove the bolt and install new thread locker
compound to the threads.
NOTE: Quad Cab model shown in the illustration. Body isolators for Regular cab models are similar.
1. Position the isolators (2) under the cab as necessary.
CAUTION: If servicing the rear isolators, install the reinforcement plates (6) and the washers (4).
2. Lower the cab onto the isolators and install the mounting bolts (5) and rebound cushions (3) as necessary (six Regular cab, eight Quad Cab).
3. Tighten the mounting bolts to 81 Nm (60 ft. lbs.).
