RAM 2500 Truck 2WD V8-5.9L VIN Z (1997)
Power Window Regulator Mounting Screws
5. Roll the door watershield away from the bottom of the inner door panel to allow access to the screws that secure the power window.
Glass Channel Front Nut
Glass Channel Rear Nut
6. Move the door glass to allow access to the hardware that secures the glass channel to the inner door panel.
7. Slide the glass rearward to disengage the channel nuts from the slotted holes in the regulator arm.
8. Pull the glass to its full up position and tape it to the upper door frame.
9. Unplug the wire harness connector from the power window motor.
10. Remove the two screws that secure the window track and the two screws that secure the rear of the regulator to the inner door panel.
11. Loosen the two screws that secure the front of the regulator to the inner door panel.
