RAM 2500 Truck 2WD V8-5.9L VIN Z (1997)
Door Switch Connectors - Typical
6. Gently pry the locking tabs of the wire harness connectors away from the switches and carefully unplug the switches.
Power Mirror Switch Knob Remove/Install
7. Pull the power mirror switch control knob rearward to remove it from the switch stem.
Power Mirror Switch Nut
8. Remove the nut that secures the power mirror switch to the door trim panel.
9. Using a wide flat-bladed tool such as a trim stick, gently pry the trim panel away from the door around the perimeter to release the retainers and
remove the trim panel.