Workshop Repair Manuals

Dodge Workshop Manuals

[PREV PAGE] [NEXT PAGE]

dodge Workshop Repair Guides


RAM 2500 Truck 2WD V8-5.9L VIN Z (1997)

Relays and Modules > Relays and Modules - HVAC > Compressor Clutch Relay > Component Information > Locations > Page 72

Page 1
background image

Compressor Clutch Relay: Service and Repair

Fig 24  Power Distribution Center

1. Disconnect and isolate the battery negative cable.
2. Remove the cover from the Power Distribution Center (PDC).
3. Refer to the label on the PDC for compressor clutch relay identification and location.
4. Unplug the compressor clutch relay from the PDC.
5. Install the compressor clutch relay by aligning the relay terminals with the cavities in the PDC and pushing the relay firmly into place.
6. Install the PDC cover.
7. Connect the battery negative cable(s).
8. Test the relay operation.

Relays and Modules > Relays and Modules - HVAC > Compressor Clutch Relay > Component Information > Locations > Page 72

[PREV PAGE] [NEXT PAGE]