RAM 2500 Truck 2WD V8-5.9L VIN Z LDC (2000)
Pinion Gear: Service and Repair
Front Axle - 286FBI
REMOVAL
1. Remove differential assembly from axle housing.
Fig. 21
2. Remove the pinion yoke nut and washer. Use Remover C-452 and Wrench C-3281 to remove the pinion yoke (Fig. 21).
Fig. 22
3. Remove the Pinion gear from housing (Fig. 22). Catch the pinion with your hand to prevent it from falling and being damaged.
4. Remove the pinion gear seal with a slide hammer or pry out with bar.
5. Remove oil slinger, front bearing.