RAM 2500 Truck 4WD L6-359 5.9L DSL Turbo VIN D FI (1998)
Cable Attachment At Foot Pedal
8. Disengage front cable from arm on foot pedal assembly.
INSTALLATION
1. Insert new cable through floorpan grommet and up to arm on pedal assembly.
2. Hook cable T-connector in arm on pedal assembly.
3. Secure floorpan grommet/seal and cable retainer.
4. Realign floor carpet.
5. Install knee bolster.
6. Engage front cable and extension cable in cable connectors. Make sure right rear cable is secured in tensioner connector.
7. Adjust cable tensioner.