RAM 2500 Truck 4WD L6-359 5.9L DSL Turbo VIN D FI (1998)
Coolant Reservoir: Service and Repair
REMOVAL
1. Remove overflow hose from radiator.
Coolant Reserve/Overflow Tank-All Except 8.0L V-10 Engine
2. Unsnap the coolant reserve/overflow tank from fan shroud. Lift straight up. The fan shroud is equipped with T-shaped slots to attach the tank. An
alignment pin is located on the side of tank.
INSTALLATION
1. Snap the tank into the two T-slots and the alignment pin on fan shroud.
2. Connect overflow hose to radiator.